- #Tunze 6091 wavebox pdf#
- #Tunze 6091 wavebox install#
- #Tunze 6091 wavebox update#
- #Tunze 6091 wavebox free#
- #Tunze 6091 wavebox windows#
The Multicontroller 7096 window will open the connection to Multicontroller 7096 is established within a few seconds which can be checked by the following bottom left message: “COMx MC7096 Vy,y.yy,y found” (7), whereby x indicates the port number on your computer and y renders the program version number, such as “COM4MC7096 V1.0.10.0 found”. Subsequently close the program and double-click the “TUNZE Multicontroller” icon again to run the program. “update successful …” (6) will be displayed in the bottom left-hand corner of the Multicontroller program.
#Tunze 6091 wavebox update#
Otherwise, an incomplete hardware update may result causing damage to Multicontroller 7096 ! An “AVRootloader” window appear briefly after first installation or re-installation. Caution ! During the installation process the USB connection between Multicontroller 7096 and computer must not be interrupted and the computer must not be switched off. (5) Double-click the „TUNZE Multicontroller“ icon on the desktop of your computer. An extension in excess of this length should only be set up with a USB repeater. The USB cable of the Multicontroller may be up to 8 m (315 in.) in length without repeater. The program should be installed on the local HDU C:\ ! (4) Use the USB cable supplied to connect the TUNZE® Multicontroller 7096 to the USB port of the computer then wait for 10 seconds. The Multicontroller program must not be installed on network drives. The Multicontroller program 7096 should have been installed in the „C:\TUNZE\Multicontroller7096“ folder.
#Tunze 6091 wavebox install#
First of all a window will be appear displaying the following text: “Do you want to install TUNZE Multicontroller ?” Click “Yes”.” Subsequently a black “TUNZE Setup” window will appear with a flashing cursor wait for about three minutes until “Software installed” is displayed, and then press any key. After having read the instructions for use, install the program by clicking on the „Install program“ button causing a link to be placed on the desktop.
#Tunze 6091 wavebox pdf#
Installation - connection to computer Insert the CD-ROM supplied along with the unit and a menu (1) will appear automatically permitting the selection either of the instructions for use (2) as a PDF file or the installation of the program (3) for Multicontroller 7096. Place the photo-electric cell connected in the light cone of the aquarium lighting see chapter titled „Night mode“ - operation in night mode”. (4) Use the screw and the nut to fasten the hose clamp. (2) Use the lower retaining screw to set the glass thickness (max. Photo-electric cell / moonlight Use the hose clamp, the screw, the nut and the separate holder to attach the photo-electric cell / moonlight to the clamp holder.
Subsequently, remove the second protective foil and then position and adhere the Multicontroller at the requested position.
#Tunze 6091 wavebox free#
Prior to adhering the strip, please make sure that the surface is clean, free from grease and smooth. Adhere the strip on to the housing (5) for this purpose remove the protective foil and press on. Place any connected photo-electric cell in the illuminated area under the aquarium lighting.Īttachment Multicontroller 7096 Use hook-and-loop strips for smooth plastic surfaces, for example. Control lamps should be visible the Foodtimer should be easily accessible ! (3) Place the cable connections in such a way that water cannot run down the cables and enter the Multicontroller.
By no means attach above the aquarium ! (2) Observe the cable length of the units because connecting cables or photo-electric cells may not be extended. Selecting the position (1) The suitable wall has to be dry and protected against splashing water and humidity. Suitable for MS-Windows 98, 2000, XP, Vista and Win7.
#Tunze 6091 wavebox windows#
Scope of delivery: Multicontroller with photo-electric cell, moonlight, holder and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program. It simulates various marine flow conditions in the aquarium and has been fitted with an especially bright LED moonlight. TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as well as some other new control possibilities. After adjustment by and saving on the computer, the data remain saved in the Multicontroller as well. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure: For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank. General aspects TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. Tunze Aquarientechnik Multicontroller 7096
0 kommentar(er)
